Cooling Towers

This is the packaged model industrial cooling tower. It is available from 7.5 Tr to  100 Tr. It is packaged model so you can just fix the inlet & outlet connection in your site no need of errection work at site.

FRP Cooling towers are withstand corrosion, resist water borne bacteria’s and organisms and it is light in weight, vertical induced draft counter flow design permits installation in any direction with freedom being round the air flow through the tower is more evenly distributed. Cooling tower casing is made of selected grade materials of Fiber Glass Reinforced Plastic & resins. Additional embossing is done for extra strength. FRP casings and basins are designed withstand severe vibration, high wind load and to resist corrosion. Honeycomb PVC fills are used for extended contact area having high heat transfer efficiency. The crossing of air & water streams in close proximaty, which creates a diffused turbulence conductive to evaporation & efficient heat transfer.

Specially designed rotary sprinkler head is made of PVC/Aluminium alloy/Nylon to avoid corrosion, also fitted with sealed ball bearings to take care of thrust & radial loads. It is distribute the water uniformly over the entire space of the fills. The fan consists of axial propeller fan blades of special alloy aluminium blades of aero dynamic designed axial flow type to achieve high efficiency. To reduce carry out losses through entrainment of moisture drops in the stream by special designed multi blade rotary drift eliminator made of FRP sheets.

Additional PVC eliminator is provided in large capacity cooling towers. Special low RPM totally enclosed motors of vertical, flange type with SS 304 extended and threaded shaft and sealed top is supplied with the cooling tower. The motor is also weather proof and in IP-55 construction. All components like tower supports, motor supports, leg supports etc are either hot dip galvanized or epoxy coated. Hardware is galvanized steel

The double inlet induced draft cross flow
Series is a field-erected, splash fill, crossflow,
wood cooling tower, designed to serve all normal
cooling water systems—as well as those “dirty water” systems which would place the long term operation of a film fill tower in jeopardy. The series is evolved from the crossflow concept of cooling towers of design advancements that our customers have found valuable.
 
 

Precision cooling system is considered as the most preeminent manufacturer and supplier of dry cooling towers. Known for many efficient features, our manufactured dry cooling towers have earned us a load of credentials.

Range :

• dry cooling tower (dry fluid coolers)
• air cooled heat exchangers (air blast coolers)

Features :

• saves water and power
• negligible maintenance
• better efficiency
• full load
• easy to install
• cooling by air at no extra cost
• no pollution
• tough fiberglass casing
• hot dip galvanized / epoxy coated structure
• ip 55 protected flange mounted variable speed motor
• aerodynamically designed axial flow type, energy saving fan in frp / al. Alloy construction
• aluminium finned copper tube coil
• electrical & temperature controls
• s. S fasteners

Specifications :

Tower proper :

• framework : hdg sheet steel
• outer shell : frp / hdg sheet steel

Heat exchanger :

• plate fin coil of seamless copper alloy pipe properly
• better cooling crimped with aluminum fin

Motor : totally enclosed flange increased efficiency mounted s. S. Extended shaft, class f insulated motor to operate at 415v, 3 ph, 50 hz, power rating.

fan frp : made dynamic balanced power saving blade with variable pitch axial flow type for increased air volume.

applications :

• fertilizer plants
• chemical and petrochemical plants
• dairies and defense factories
• automobile industry
• cement and sugar industries
• machine tools manufacturing unit
• furnaces manufacturing unit
• diesel gen-set manufacturing unit
• air gas compressors manufacturing unit

For the manufacturing of precision-engineered, precision cooling system is trusted as the prime manufacturer and supplier in the markets. The response client have shown in our offered range of  FRP cooling towers has stated us on the top.

In demand for :

• induced draft counter flow
• cross flow
• high efficiency
• maintenance free
• minimum water loss
• built for industrial & commercial market

specifications :

• round bottle shape – xe series
• extra efficiency
• economic energy efficiency
• tough fiberglass casing & basin
• hot dip galvanized structure
• ip 55 protected flange mounted variable speed motor
• aerodynamically designed axial flow type
• energy saving fan in frp / alloy construction
• honeycomb edge folded pvc fills
• galvanized / pvc spray distribution system
• abs & pp & nylon spray nozzles
• mist / drift eliminators
• s. S fasteners
• available from 7. 5 tr to 1200 tr
• withstand corrosion
• resist water borne bacteria’s and organisms
• light in weight
• vertical induced draft counter flow design
• permits installation in any direction with freedom
• round the air flow through the tower is more evenly distributed
• cooling tower casing is made of selected grade materials of fiber glass
• reinforced plastic & resins
• additional embossing is done for extra strength
• frp casings and basins are designed withstand severe vibration
• used for extended contact area having high heat transfer efficiency
• crossing of air & water streams in close proximity
• creates a diffused turbulence conductive to evaporation & efficient heat transfer
• specially designed rotary sprinkler head is made of pvc/aluminium alloy/nylon to avoid corrosion
• fitted with sealed ball bearings to take care of thrust & radial loads
• distribute the water uniformly over the entire space of the fills
• consists of axial propeller fan blades of special alloy aluminum blades of aerodynamic
• designed axial flow type to achieve high efficiency
• to reduce carry out losses through entrainment of moisture drops in the stream by special designed multi blade rotary drift eliminator made of frp sheets
• additional pvc eliminator is provided in large capacity cooling towers
• special low rpm totally enclosed motors of vertical, flange type with ss 304 extended and threaded shaft
• sealed top is supplied with the cooling tower
• the motor is also weather proof and in ip-55 construction
• all components like tower supports, motor supports, leg supports etc are either hot dip galvanized or epoxy coated
• hardware is galvanized steel

shapes :

• square shape
• rectangular shape

Applications :

• fertilizer plants
• chemical and petrochemical plants
• dairies and defense factories
• automobile industry
• cement and sugar industries
• machine tools manufacturing unit
• furnaces manufacturing unit
• diesel gen-set manufacturing unit
• air gas compressors manufacturing unit

The double inlet induced draft cross flow
series is a field-erected, splash fill, crossflow,
wood cooling tower, designed to serve all normal
cooling water systems—as well as those “dirty water” systems which would place the long term operation of a film fill tower in jeopardy. The series is evolved from the crossflow concept of cooling towers of design advancements that our customers have found valuable.

Precision cooling system is considered as the most preeminent manufacturer and supplier of dry cooling towers. Known for many efficient features, our manufactured dry cooling towers have earned us a load of credentials.

Range :

• Dry cooling tower (dry fluid coolers)
• Air cooled heat exchangers (air blast coolers)

Features :

• Saves water and power
• Negligible maintenance
• Better efficiency
• Full load
• easy to install
• Cooling by air at no extra cost
• No pollution
• Tough fiberglass casing
• Hot dip galvanized / epoxy coated structure
• Ip 55 protected flange mounted variable speed motor
• Aerodynamically designed axial flow type, energy saving fan in frp / al. Alloy construction
• Aluminium finned copper tube coil
• Electrical & temperature controls
• S. S fasteners

Specifications :

Tower proper :

• Framework : hdg sheet steel
• Outer shell : frp / hdg sheet steel

Heat exchanger :

• plate fin coil of seamless copper alloy pipe properly
• better cooling crimped with aluminum fin

Motor : totally enclosed flange increased efficiency mounted s. S. Extended shaft, class f insulated motor to operate at 415v, 3 ph, 50 hz, power rating.

fan frp : made dynamic balanced power saving blade with variable pitch axial flow type for increased air volume.

Applications :

• Fertilizer plants
• Chemical and petrochemical plants
• Dairies and defense factories
• Automobile industry
• Cement and sugar industries
• Machine tools manufacturing unit
• Furnaces manufacturing unit
• Diesel gen-set manufacturing unit
• Air gas compressors manufacturing unit